NOTE :
1. THE ABOVE SHOWN PERFORMANCE CURVE IS FOR WATER , WITHOUT NON-RETURN VALVE & WATER LEVEL 300 MM BELOW THE PUMP SUCTION. PUMP DELIVERS HIGHER DISCHARGE WHEN CONNECTED AT TANK LEVEL (20-30% MORE), AND REDUCES AS THE WATER LEVEL DROPS.
2. THE PUMP CAN PRIME, FOLLOWING INITIAL PRIMING, UPTO 400 MM. FOR HIGHER DEPTHS UPTO 600 MM A NON-RETURN VALVE IS TO BE USED AT THE DELIVERY SIDE. USE OF NON RETURN VALVE CAUSES A DROP OF 10% IN THE PERFORMANCE.
3. THE SUCTION LINE MUST BE AIR TIGHT, AND AVOID THE USE OF FOOT VALVE.
STANDARD SPARES : IMPELLER, MECHANICAL SEAL AND GASKET (SEALING) SET.
|